Browsing by Author "Amit, Kumar"

Now showing 1 - 5 of 5
  • Thumbnail Image
    Item
    8051 Based Renewable Energy – 12v DC Power Generation Using Back EMF & Solar
    (2015-12-23T09:25:18Z) Amit, Kumar; Gagan Deep, Singh; Rahul, Rai; Surabhi, Kumari
    In this project solar energy and motor back emf is used to charge the battery. Sometimes solar panel will not provide enough voltage to charge battery due to insufficient sun light. So here a Buck Boost circuit is used to boost the voltage to required level. And also we run a motor through motor driver which is actuated by the controller. That motor is coupled by another motor. Due to coupling the other motor rotates and generates back emf. This genearated back emf is boosted and applied to battery to charge the battery. A bulb or LED will be connected to battery as a load, the battery supply is given to LED through another Buck Boost so that if battery voltage reduces the intensity of light remains still due to constant voltage supplied by boost circuit.
  • Thumbnail Image
    Item
    Automatic Controlling of Electrical Devices Using Active Phase Selector for Single Phase Load From Three Phase Supply and Detection of Phase Fault
    (2016-07-12T11:35:08Z) Amit, Kumar; Anjali, Kumari; Pradeep, Choudhary; S., Masooda Khanam
    Phase absence is a very common and severe problem in any industry, home or office. Many times one or two phases may not be live in three phase supply. Because of this, many times, some electrical appliances will be on in one room and OFF in another room. This creates a big disturbance to our routine work. This project is designed to check the availability of any live phase, and the load will be connected to the particular live phase only. Even a single phase is available, and then also, the load will be in ON condition. If two or three phases are live, the load will be connected to phase I only. An LCD is provided to display the status of the phase condition. The purpose of the project is to provide the supply for the single phase load from the one of the active phase of the 3-phase supply.
  • Thumbnail Image
    Item
    Parametric Studies and Dynamic Analysis of Transmission Tower Using Staad Pro
    (2020-09-21T07:48:34Z) Ahiaan, Wani; Amit, Kumar; Aniket, Gupta; Mainak D., Gupta
    India features a large population residing everywhere the country and therefore the electricity supply need of this population creates requirement of an outsized transmission and distribution system. Also, the disposition of the first resources for electric power generation viz., coal, hydro potential, is sort of uneven, thus, again adding to the transmission requirements. Transmission line is an integrated system consisting of conductor subsystem, ground wire subsystem and one subsystem for every category of support structure. Mechanical supports of cable represent a big portion of the value of the road and that they play a crucial role within the reliable power transmission. They are designed and constructed in big variety of shapes, types, sizes, configurations and materials.
  • Thumbnail Image
    Item
    Study Of Geopolymer Concrete Using Flyash and GGBS
    (2016-06-22T12:00:06Z) Prateek, Sharan; Amit, Kumar; Sushmita, Ravi; Shubham, Rewar
    Concrete is one of the fundamental materials in civil engineering especially structural industries. The purpose of this project is to experimentally investigate the effect of geopolymer concrete by replacing cement. In our project low calcium flyash based geopolymer concrete is provided. In this concretic geopolymer cement is used instead of ordinary portland cement, which is obtained from the reaction of low calcium flyash with the alkaline solution i.e. sodium hydroxide and sodium silicate.This project constitutes of testing of the geopolymer concrete cube containing varying proportion of Fly Ash and GGBS for different periods of curing. Thus, after accumulating all the materials, the molding of the samples for the longest curing period (say 28 days) is done first and kept for curing. Consecutively, the samples are then moulded for intermediate curing periods (say 28 days, 14 days and 7 days) and tested accordingly. The construction industry is in demand of ecofriendly & greener materials which are durable.As compared to the existing concrete materials fly ash is advantageous but its uses as tested against strength & durability needs to be confirmed. The project work emphasis on the research & development activity in construction materials using fly ash with geopolymers.
  • Thumbnail Image
    Item
    Web App for Soarian Scheduling Alerts
    (2016-12-01T12:45:41Z) Amit, Kumar
    Web App for Soarian Scheduling Alerts is a solution suite is designed up for appointment management for the healthcare institutions. Medical Practitioners use it for managing encounter and many other details with patients. Alerts are one of the parts in the application upgrade event. Alerts is currently used for sending information to clients and associates across Cerner Healthcare solutions and other parts of the globe. The events mostly include updates about software patches, upgrades and installation of application if required. The day of event informs clients that system will be put to a maintenance stage for specified time as described in the mails sent to clients and other associates.